Quick Answer: Can I Use 1866mhz RAM On 1333?

Is 1600MHz RAM good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151.

Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial..

Can I use 2400mhz ram 1600mhz motherboard?

They will work fine, all ram boots at SPD JEDEC standard, and the SPD of that ram will be 1600mhz, it may even be 1333mhz, I cant remember with DDR3 and you’ll need to manually bump it upto 1600mhz.

Does dh61ww support 1600mhz RAM?

Splendid. Intel® Desktop Board DH61WW no, your mobo is limited to 1333mhz, no overclocking possible. but you will be able to run all 16gb. for optimal performance try tightening timings a bit!

Is 1866 MHz RAM good?

If the system is limited to 8GB of maximum RAM, the 1600 -> 1866 upgrade will show a modest improvement in memory-bound workloads, but unless you have a specific memory-bound workload you’re trying to enhance, I don’t think it’s enough for a casual user to spend the money on.

Can I use two different brands of RAM?

Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. … So at the end of the day, yes you can mix RAM brands as long as you are careful.

Can I use 1866MHz RAM on 1600mHz motherboard?

1866MHz RAM will work, but any RAM you use with that motherboard will be running at 1600MHz. … Overclocking your CPU can allow the RAM to run at it’s advertised speed, assuming sufficient cooling and system stability.

Can I use 4gb and 8gb RAM together?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Does MHz matter buying RAM?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. … This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

Do motherboards have RAM speed limits?

Both motherboards and CPUs have RAM (memory aka DIMM) speed limits. … Both motherboards and CPUs have RAM (memory aka DIMM) speed limits. Your actual speed limit will be the lower of the two. That being said, depending on what applications you use, you could be fine with 2133 MHz.

Can I use 1333mHz and 1866MHz RAM together?

Yes many people will recommend getting matching sticks of RAM, but I almost never run into issues and I mix and match RAM all the time. For example, If you put just one 1866MHz RAM into your motherboard, it will still run at 1333MHz by default until you go into the BIOS and overclock it to 1866MHz.

Can I overclock 1600MHz RAM?

Of course you can overclock your RAM but you typically end up having to sacrifice latency which probably has more of an impact on the performance than the actual frequency. IMHO you don’t get a noticeable difference in system performance from overclocking your RAM but you definitely can affect your system’s stability.

What is the difference between 1600 and 1866 Ram?

It’s close enough to be a draw, and the same could be said for all three top kits. Likewise, the DDR3-1600 and DDR3-1866 are basically identical in performance. … Thief’s best minimum performance was achieved by the DDR3-2133 RAM, and the worst by the DDR3-1866. But differing by just 2.9%, it’s a pretty tight match.

What does ddr3 1866 mean?

It means its DDR3 1866 MHZ RAM. Its just a designation used by the DDR standard to easily categorize between DDR, DDR2 and DDR3 RAM and there different operating speeds. DDR means Double Data Rate. So DDR is 2x 1866 = 3732 . DDR2 is then 2×3732=7464 and taht times 2 is then just over 14900.

Can you use 1600mHz RAM in 1333?

The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.